AgeCommit message (Collapse)AuthorFilesLines
2016-07-27net: asix: autoneg will set WRITE_MEDIUM regpatch_net_usb_asix_v2Grant Grundler1-4/+1
The miii_nway_restart() causes a PHY link change activity and ax88772_link_reset will be called. link_reset will set AX_CMD_WRITE_MEDIUM_MODE register correctly. The asix_write_medium_mode in reset() fills in a default value to the register which may be different from the negotiation result. So do this first. Ignore the ret value since it's ignored in link_reset code too. Signed-off-by: Grant Grundler <> Signed-off-by: Robert Foss <>
2016-07-27net: asix: see 802.3 spec for phy resetGrant Grundler1-3/+24 Ben Hutchings is correct. IEEE 802.3 spec section " Reset" requires up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET bit is clear. Signed-off-by: Grant Grundler <> Signed-off-by: Robert Foss <>
2016-07-27net: asix: Fix AX88772x resume failuresAllan Chou1-1/+46
The change fixes AX88772x resume failure by - Restore incorrect AX88772A PHY registers when resetting - Need to stop MAC operation when suspending - Need to restart MII when restoring PHY Signed-off-by: Allan Chou <> Signed-off-by: Robert Foss <>
2016-07-27net: asix: Avoid looping when the device is disconnectedVincent Palatin2-12/+46
Check the answers from the USB stack and avoid re-sending multiple times the request if the device has disappeared. Signed-off-by: Vincent Palatin <> Signed-off-by: Robert Foss <>
2016-07-27net: asix: Add in_pm parameterFreddy Xin4-150/+472
In order to R/W registers in suspend/resume functions, in_pm flags are added to some functions to determine whether the nopm version of usb functions is called. Save BMCR and ANAR PHY registers in suspend function and restore them in resume function. Reset HW in resume function to ensure the PHY works correctly. Signed-off-by: Freddy Xin <> Signed-off-by: Robert Foss <>
2016-07-24Merge tag 'hwmon-for-linus-v4.8' of ↵Linus Torvalds27-606/+2964
git:// Pull hwmon updates from Guenter Roeck: - New drivers for FTS BMC "Teutates", TI INA3221, and Sensirion SHT3x. - Added support for Microchip MCP9808 and TI TMP461. - Cleanup and minor fixes in various drivers. * tag 'hwmon-for-linus-v4.8' of git:// (37 commits) Documentation: dtb: xgene: Add hwmon dts binding documentation hwmon: (ftsteutates) Remove unused including <linux/version.h> hwmon: (adt7411) set bit 3 in CFG1 register hwmon: Add driver for FTS BMC chip "Teutates" hwmon: (sht3x) add humidity heater element control hwmon: (jc42) Add support for generic JC-42.4 devicetree binding dt/bindings: Add bindings for JC-42.4 compatible temperature sensors hwmon: (tmp102) Convert to use regmap, and drop local cache hwmon: (tmp102) Rework chip configuration hwmon: (tmp102) Improve handling of initial read delay hwmon: (lm90) Drop unnecessary else statements hwmon: (lm90) Use bool for valid flag hwmon: (lm90) Read limit registers only once hwmon: (lm90) Simplify read functions hwmon: (lm90) Use devm_hwmon_device_register_with_groups hwmon: (lm90) Use devm_add_action for cleanup hwmon: (lm75) Convert to use regmap hwmon: (lm75) Add update_interval attribute hwmon: (lm75) Drop lm75_read_value and lm75_write_value hwmon: (lm75) Handle cleanup with devm_add_action ...
2016-07-24Merge tag 'renesas-sh-drivers-for-v4.8' of ↵Linus Torvalds3-11/+0
git:// Pull SH drivers updates from Simon Horman: "Drop use of SH Drivers on Renesas ARM Based SoCs. I expect this to be my last pull request for these drivers as it removes usage of them from Renesas ARM Based SoCs and my co-maintenance of them. The drivers are still used by some SH SoCs and listed under SUPERH in the MAINTAINERS file" * tag 'renesas-sh-drivers-for-v4.8' of git:// MAINTAINERS: Drop drivers/sh/ for Renesas ARM drivers: sh: Stop using the legacy clock domain on ARM
2016-07-24Merge tag 'usb-4.8-rc1' of ↵Linus Torvalds109-3759/+5790
git:// Pull USB updates from Greg KH: "Here's the big USB driver update for 4.8-rc1. Lots of the normal stuff in here, musb, gadget, xhci, and other updates and fixes. All of the details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.8-rc1' of git:// (169 commits) cdc-acm: beautify probe() cdc-wdm: use the common CDC parser cdc-acm: cleanup error handling cdc-acm: use the common parser usbnet: move the CDC parser into USB core usb: musb: sunxi: Simplify dr_mode handling usb: musb: sunxi: make unexported symbols static usb: musb: cppi41: add dma channel tracepoints usb: musb: cppi41: move struct cppi41_dma_channel to header usb: musb: cleanup cppi_dma header usb: musb: gadget: add usb-request tracepoints usb: musb: host: add urb tracepoints usb: musb: add tracepoints to dump interrupt events usb: musb: add tracepoints for register access usb: musb: dsps: use musb register read/write wrappers instead usb: musb: switch dev_dbg to tracepoints usb: musb: add tracepoints support for debugging usb: quirks: Add no-lpm quirk for Elan phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt phy: rockhip-usb: use devm_add_action_or_reset() ...
2016-07-24Merge tag 'tty-4.8-rc1' of ↵Linus Torvalds68-1144/+1398
git:// Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.8-rc1. Lots of good cleanups from Jiri on a number of vt and other tty related things, and the normal driver updates. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.8-rc1' of git:// (90 commits) tty/serial: atmel: enforce tasklet init and termination sequences serial: sh-sci: Stop transfers in sci_shutdown() serial: 8250_ingenic: drop #if conditional surrounding earlycon code serial: 8250_mtk: drop !defined(MODULE) conditional serial: 8250_uniphier: drop !defined(MODULE) conditional earlycon: mark earlycon code as __used iif the caller is built-in tty/serial/8250: use mctrl_gpio helpers serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct serial: mctrl_gpio: add modem control read routine tty/serial/8250: make UART_MCR register access consistent serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV serial: 8250_dma: Export serial8250_rx_dma_flush() dmaengine: hsu: Export hsu_dma_get_status() tty: serial: 8250: add CON_CONSDEV to flags tty: serial: samsung: add byte-order aware bit functions tty: serial: samsung: fixup accessors for endian serial: sirf: make fifo functions static serial: mps2-uart: make driver explicitly non-modular serial: mvebu-uart: free the IRQ in ->shutdown() serial/bcm63xx_uart: use correct alias naming ...
2016-07-24Merge tag 'staging-4.8-rc1' of ↵Linus Torvalds529-12655/+22391
git:// Pull staging and IIO driver updates from Greg KH: "Here is the big Staging and IIO driver update for 4.8-rc1. We ended up adding more code than removing, again, but it's not all that bad. Lots of cleanups all over the staging tree, and new IIO drivers, full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.8-rc1' of git:// (417 commits) drivers:iio:accel:mma8452: removed unwanted return statements drivers:iio:accel:mma8452: added cleanup provision in case of failure. iio: Add iio.git tree to MAINTAINERS iio:st_pressure: clean useless static channel initializers iio:st_pressure:lps22hb: temperature support iio:st_pressure:lps22hb: open drain support iio:st_pressure: temperature triggered buffering iio:st_pressure: document sampling gains iio:st_pressure: align storagebits on power of 2 iio:st_sensors: align on storagebits boundaries staging:iio:lis3l02dq drop separate driver iio: accel: st_accel: Add lis3l02dq support iio: adc: add missing of_node references to iio_dev iio: adc: ti-ads1015: add indio_dev->dev.of_node reference iio: potentiometer: Fix typo in Kconfig iio: potentiometer: mcp4531: Add device tree binding iio: potentiometer: mcp4531: Add device tree binding documentation iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x iio:imu:mpu6050: icm20608 initial support iio: adc: max1363: Add device tree binding ...
2016-07-24Merge tag 'char-misc-4.8-rc1' of ↵Linus Torvalds33-1608/+2147
git:// Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.8-rc1. Not a lot of stuff, but it's all over the place, full details are in the shortlog. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.8-rc1' of git:// (49 commits) lkdtm: silence warnings about function declarations lkdtm: hide unused functions intel_th: pci: Add Kaby Lake PCH-H support intel_th: Fix a deadlock in modprobing dsp56k: prevent a harmless underflow chardev: add missing line break in pr_warn lkdtm: use struct arrays instead of enums lkdtm: move jprobe entry points to start of source lkdtm: reorganize module paramaters lkdtm: rename globals for clarity lkdtm: rename "count" to "crash_count" lkdtm: remove intentional off-by-one array access lkdtm: split remaining logic bug tests to separate file lkdtm: split heap corruption tests to separate file lkdtm: split memory permissions tests to separate file lkdtm: split usercopy tests to separate file lkdtm: drop "alloc_size" parameter lkdtm: add usercopy test for blocking kernel text extcon: adc-jack: add suspend/resume support extcon: add missing of_node_put after calling of_parse_phandle ...
2016-07-24Merge tag 'gfs2-4.7.fixes' of ↵Linus Torvalds19-116/+182
git:// Pull gfs2 updates from Bob Peterson: "We've got ten patches this time, half of which are related to a plethora of nasty outcomes when inodes are transitioned from the unlinked state to the free state. Small file systems are particularly vulnerable to these problems, and it can manifest as mainly hangs, but also file system corruption. The patches have been tested for literally many weeks, with a very gruelling test, so I have a high level of confidence. - Andreas Gruenbacher wrote a series of five patches for various lockups during the transition of inodes from unlinked to free. The main patch is titled "Fix gfs2_lookup_by_inum lock inversion" and the other four are support and cleanup patches related to that. - Ben Marzinski contributed two patches with regard to a recreatable problem when gfs2 tries to write a page to a file that is being truncated, resulting in a BUG() in gfs2_remove_from_journal. Note that Ben had to export vfs function __block_write_full_page to get this to work properly. It's been posted a long time and he talked to various VFS people about it, and nobody seemed to mind. - I contributed 3 patches: o The first one fixes a memory corruptor: a race in which one process can overwrite the gl_object pointer set by another process, causing kernel panic and other symptoms. o The second patch fixes another race that resulted in a false-positive BUG_ON. This occurred when resource group reservations were freed by one process while another process was trying to grab a new reservation in the same resource group. o The third patch fixes a problem with doing journal replay when the journals are not all the same size" * tag 'gfs2-4.7.fixes' of git:// GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes GFS2: Check rs_free with rd_rsspin protection gfs2: writeout truncated pages fs: export __block_write_full_page gfs2: Lock holder cleanup gfs2: Large-filesystem fix for 32-bit systems gfs2: Get rid of gfs2_ilookup gfs2: Fix gfs2_lookup_by_inum lock inversion gfs2: Initialize iopen glock holder for new inodes GFS2: don't set rgrp gl_object until it's inserted into rgrp tree
2016-07-24Linux 4.7Linus Torvalds1-1/+1
2016-07-24Merge tag 'ceph-for-4.7-rc8' of git:// Torvalds1-43/+113
Pull ceph fix from Ilya Dryomov: "A fix for a long-standing bug in the incremental osdmap handling code that caused misdirected requests, tagged for stable" The tag is signed with a brand new key - Sage is on vacation and I didn't anticipate this" * tag 'ceph-for-4.7-rc8' of git:// libceph: apply new_state before new_up_client on incrementals
2016-07-23Merge git:// Torvalds64-320/+850
Pull networking fixes from David Miller: 1) Fix memory leak in nftables, from Liping Zhang. 2) Need to check result of vlan_insert_tag() in batman-adv otherwise we risk NULL skb derefs, from Sven Eckelmann. 3) Check for dev_alloc_skb() failures in cfg80211, from Gregory Greenman. 4) Handle properly when we have ppp_unregister_channel() happening in parallel with ppp_connect_channel(), from WANG Cong. 5) Fix DCCP deadlock, from Eric Dumazet. 6) Bail out properly in UDP if sk_filter() truncates the packet to be smaller than even the space that the protocol headers need. From Michal Kubecek. 7) Similarly for rose, dccp, and sctp, from Willem de Bruijn. 8) Make TCP challenge ACKs less predictable, from Eric Dumazet. 9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli. * git:// (65 commits) packet: propagate sock_cmsg_send() error net/mlx5e: Fix del vxlan port command buffer memset packet: fix second argument of sock_tx_timestamp() net: switchdev: change ageing_time type to clock_t Update maintainer for EHEA driver. net/mlx4_en: Add resilience in low memory systems net/mlx4_en: Move filters cleanup to a proper location sctp: load transport header after sk_filter net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata net: nb8800: Fix SKB leak in nb8800_receive() et131x: Fix logical vs bitwise check in et131x_tx_timeout() vlan: use a valid default mtu value for vlan over macsec net: bgmac: Fix infinite loop in bgmac_dma_tx_add() mlxsw: spectrum: Prevent invalid ingress buffer mapping mlxsw: spectrum: Prevent overwrite of DCB capability fields mlxsw: spectrum: Don't emit errors when PFC is disabled mlxsw: spectrum: Indicate support for autonegotiation mlxsw: spectrum: Force link training according to admin state r8152: add MODULE_VERSION ...
2016-07-23Merge branch 'overlayfs-linus' of ↵Linus Torvalds3-32/+29
git:// Pull overlayfs fixes from Miklos Szeredi: "This contains a fix for a potential crash/corruption issue and another where the suid/sgid bits weren't cleared on write" * 'overlayfs-linus' of git:// ovl: verify upper dentry in ovl_remove_and_whiteout() ovl: Copy up underlying inode's ->i_mode to overlay inode ovl: handle ATTR_KILL*
2016-07-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-27/+92
Merge misc fixes from Andrew Morton: "Five fixes" * emailed patches from Andrew Morton <>: pps: do not crash when failed to register tools/vm/slabinfo: fix an unintentional printf testing/radix-tree: fix a macro expansion bug radix-tree: fix radix_tree_iter_retry() for tagged iterators. mm: memcontrol: fix cgroup creation failure after many small jobs
2016-07-23Merge tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of ↵Linus Torvalds10-61/+295
git:// Pull intel kabylake drm fixes from Dave Airlie: "As mentioned Intel has gathered all the Kabylake fixes from -next, which we've enabled in 4.7 for the first time, these are pretty much limited in scope to only affects kabylake, which is hw that isn't shipping yet. So I'm mostly okay with it going in now. If we don't land this, it might be a good idea to disable kabylake support in 4.7 before we ship" * tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git:// (28 commits) drm/i915/kbl: Introduce the first official DMC for Kabylake. drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance drm/i195/fbc: Add WaFbcNukeOnHostModify drm/i915/gen9: Add WaFbcWakeMemOn drm/i915/gen9: Add WaFbcTurnOffFbcWatermark drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch drm/i915/gen9: Add WaEnableChickenDCPR drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing drm/i915/kbl: Add WaDisableGafsUnitClkGating drm/i915/kbl: Add WaForGAMHang drm/i915: Add WaInsertDummyPushConstP for bxt and kbl drm/i915/kbl: Add WaDisableDynamicCreditSharing drm/i915/kbl: Add WaDisableGamClockGating drm/i915/gen9: Enable must set chicken bits in config0 reg drm/i915/kbl: Add WaDisableLSQCROPERFforOCL drm/i915/kbl: Add WaDisableSDEUnitClockGating drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 drm/i915/kbl: Add WaEnableGapsTsvCreditFix ...
2016-07-23Merge tag 'drm-fixes-for-v4.7-rc8-intel' of ↵Linus Torvalds2-1/+7
git:// Pull drm fixes from Dave Airlie: "Two i915 regression fixes. Intel have submitted some Kabylake fixes I'll send separately, since this is the first kernel with kabylake support and they don't go much outside that area I think they should be fine" * tag 'drm-fixes-for-v4.7-rc8-intel' of git:// drm/i915: add missing condition for committing planes on crtc drm/i915: Treat eDP as always connected, again
2016-07-23Merge tag 'm68k-for-v4.8-tag1' of ↵Linus Torvalds23-16/+64
git:// Pull m68k upddates from Geert Uytterhoeven: - assorted spelling fixes - defconfig updates * tag 'm68k-for-v4.8-tag1' of git:// m68k/defconfig: Update defconfigs for v4.7-rc2 m68k: Assorted spelling fixes
2016-07-23Merge tag 'armsoc-fixes' of ↵Linus Torvalds9-41/+49
git:// Pull ARM SoC fixes from Olof Johansson: "A handful of fixes before final release: Marvell Armada: - One to fix a typo in the devicetree specifying memory ranges for the crypto engine - Two to deal with marking PCI and device-memory as strongly ordered to avoid hardware deadlocks, in particular when enabling above crypto driver. - Compile fix for PM Allwinner: - DT clock fixes to deal with u-boot-enabled framebuffer (simplefb). - Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to make clocks register proper. Tegra: - Fix SD card voltage setting on the Tegra3 Beaver dev board Misc: - Two maintainers updates for STM32 and STi platforms" * tag 'armsoc-fixes' of git:// ARM: tegra: beaver: Allow SD card voltage to be changed MAINTAINERS: update STi maintainer list MAINTAINERS: update STM32 maintainers list ARM: mvebu: compile pm code conditionally ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys ARM: mvebu: map PCI I/O regions strongly ordered ARM: mvebu: fix HW I/O coherency related deadlocks ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
2016-07-23Merge branch 'linus' of ↵Linus Torvalds2-2/+3
git:// Pull crypto fixes from Herbert Xu: "This fixes a sporadic build failure in the qat driver as well as a memory corruption bug in rsa-pkcs1pad" * 'linus' of git:// crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: qat - make qat_asym_algs.o depend on asn1 headers
2016-07-23Merge branch 'for-linus' of ↵Linus Torvalds3-3/+8
git:// Pull key handling fixes from James Morris: "Quoting David Howells: Here are three miscellaneous fixes: (1) Fix a panic in some debugging code in PKCS#7. This can only happen by explicitly inserting a #define DEBUG into the code. (2) Fix the calculation of the digest length in the PE file parser. This causes a failure where there should be a success. (3) Fix the case where an X.509 cert can be added as an asymmetric key to a trusted keyring with no trust restriction if no AKID is supplied. Bugs (1) and (2) aren't particularly problematic, but (3) allows a security check to be bypassed. Happily, this is a recent regression and never made it into a released kernel" * 'for-linus' of git:// KEYS: Fix for erroneous trust of incorrectly signed X.509 certs pefile: Fix the failure of calculation for digest PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
2016-07-23Merge branch 'for-linus' of ↵Linus Torvalds6-31/+39
git:// Pull input fixes from Dmitry Torokhov: "A few more fixes for the input subsystem: - restore naming for tsc2005 touchscreens as some userspace match on it - fix out of bound access in legacy keyboard driver - fixup in RMI4 driver Everything is tagged for stable as well" * 'for-linus' of git:// Input: tsc200x - report proper input_dev name tty/vt/keyboard: fix OOB access in do_compute_shiftstate() Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
2016-07-23Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds2-8/+9
git:// Pull libnvdimm fix from Dan Williams: "This contains a regression fix for a problem that was introduced in v4.7-rc6. In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device- specific-method) format that the platform firmware implements for nvdimm devices. We initially fixed a regression in probing the QEMU DSM implementation by making acpi_check_dsm() tolerant of the way QEMU reports the "0 DSMs supported" condition. However, that broke HPE platforms since that tolerance caused the driver to mistakenly match the 1-zero-byte response those platforms give to "unknown" commands. Instead, we simply make the driver tolerant of not finding any supported DSMs. This has been tested to work with both QEMU and HPE platforms. This commit has appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git:// nfit: make DIMM DSMs optional
2016-07-23Merge tag 'gpio-v4.7-6' of ↵Linus Torvalds1-2/+5
git:// Pull GPIO fix from Linus Walleij: "Compile problem fix for Tegra, Sorry to send this in the last minute but Ingo says this build failure is very prominent so I'm not going to wait for v4.7 before sending it. It is a case of COMPILE_TEST causing more problems than it solves and I'm already swearing about me shooting myself in the foot with that gun :(" * tag 'gpio-v4.7-6' of git:// gpio: tegra: don't auto-enable for COMPILE_TEST
2016-07-23Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-6/+5
git:// Pull clk fixes from Michael Turquette: "Fix a bug in the at91 clk driver, two compile time warnings in sunxi clk drivers, and one bug in a sunxi clk driver introduced in the 4.7 merge window" * tag 'clk-fixes-for-linus' of git:// clk: at91: fix clk_programmable_set_parent() clk: sunxi: remove unused variable clk: sunxi: display: Add per-clock flags clk: sunxi: tcon-ch1: Do not return a negative error in get_parent
2016-07-23Merge branch 'for-4.7-fixes' of ↵Linus Torvalds1-0/+6
git:// Pull libata fix from Tejun Heo: "Another fallout from max_sectors bump a couple years ago. The lite-on optical drive times out on large requests" * 'for-4.7-fixes' of git:// libata: LITE-ON CX1-JB256-HP needs lower max_sectors
2016-07-23Merge tag 'mmc-v4.7-rc7' of git:// Torvalds2-14/+18
Pull MMC fixes from Ulf Hansson: "Here are a few late mmc fixes intended for v4.7 final. MMC core: - Fix eMMC packed command header endianness - Fix free of uninitialized buffer for mmc ioctl MMC host: - pxamci: Fix potential oops in ->probe()" * tag 'mmc-v4.7-rc7' of git:// mmc: pxamci: fix potential oops mmc: block: fix packed command header endianness mmc: block: fix free of uninitialized 'idata->buf'
2016-07-23Merge tag 'sound-4.7-fix2' of ↵Linus Torvalds5-7/+32
git:// Pull sound fixes from Takashi Iwai: "No surprise, just a few small fixes: a couple of changes are seen in the core part, and both of them are rather for unusual error paths. The rest are the regular HD-audio fixes and one USB-audio regression fix" * tag 'sound-4.7-fix2' of git:// ALSA: usb-audio: Fix quirks code is not called ALSA: hda: add AMD Stoney PCI ID with proper driver caps ALSA: hda - fix use-after-free after module unload ALSA: pcm: Free chmap at PCM free callback, too ALSA: ctl: Stop notification after disconnection ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
2016-07-23Merge branch 'for-linus' of git:// Torvalds1-35/+39
Pull NVMe fix from Jens Axboe: "Late addition here, it's basically a revert of a patch that was added in this merge window, but has proven to cause problems. This is swapping out the RCU based namespace protection with a good old mutex instead" * 'for-linus' of git:// nvme: Remove RCU namespace protection
2016-07-23pps: do not crash when failed to registerJiri Slaby1-1/+1
With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: Signed-off-by: Jiri Slaby <> Acked-by: Rodolfo Giometti <> Cc: <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2016-07-23tools/vm/slabinfo: fix an unintentional printfDan Carpenter1-1/+2
The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling') Link: Signed-off-by: Dan Carpenter <> Acked-by: Christoph Lameter <> Cc: Sergey Senozhatsky <> Cc: Colin Ian King <> Cc: Laura Abbott <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2016-07-23testing/radix-tree: fix a macro expansion bugDan Carpenter1-1/+1
There are no parentheses around this macro and it causes a problem when we do: index = rand() % THRASH_SIZE; Link: Signed-off-by: Dan Carpenter <> Acked-by: Ross Zwisler <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2016-07-23radix-tree: fix radix_tree_iter_retry() for tagged iterators.Andrey Ryabinin1-0/+1
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags. Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot() leading to crash: RIP: radix_tree_next_slot include/linux/radix-tree.h:473 find_get_pages_tag+0x334/0x930 mm/filemap.c:1452 .... Call Trace: pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960 mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516 ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736 do_writepages+0x97/0x100 mm/page-writeback.c:2364 __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300 filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490 ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115 vfs_fsync_range+0x10a/0x250 fs/sync.c:195 vfs_fsync fs/sync.c:209 do_fsync+0x42/0x70 fs/sync.c:219 SYSC_fdatasync fs/sync.c:232 SyS_fdatasync+0x19/0x20 fs/sync.c:230 entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 We must reset iterator's tags to bail out from radix_tree_next_slot() and go to the slow-path in radix_tree_next_chunk(). Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Link: Signed-off-by: Andrey Ryabinin <> Reported-by: Dmitry Vyukov <> Acked-by: Konstantin Khlebnikov <> Cc: Matthew Wilcox <> Cc: Hugh Dickins <> Cc: Ross Zwisler <> Cc: <> Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2016-07-23mm: memcontrol: fix cgroup creation failure after many small jobsJohannes Weiner3-24/+87
The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./ [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [ init the IDR] Link: Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups") Link: Signed-off-by: Johannes Weiner <> Reported-by: John Garcia <> Reviewed-by: Vladimir Davydov <> Acked-by: Tejun Heo <> Cc: Nikolay Borisov <> Cc: <> [3.19+] Signed-off-by: Andrew Morton <> Signed-off-by: Linus Torvalds <>
2016-07-22gpio: tegra: don't auto-enable for COMPILE_TESTArnd Bergmann1-2/+5
I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann <> Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij <>
2016-07-22libceph: apply new_state before new_up_client on incrementalsIlya Dryomov1-43/+113
Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: Cc: # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: # 3.15+ Signed-off-by: Ilya Dryomov <> Reviewed-by: Josh Durgin <>
2016-07-22crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request structHerbert Xu1-2/+2
To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: Signed-off-by: Tadeusz Struk <> Signed-off-by: Herbert Xu <>
2016-07-22ovl: verify upper dentry in ovl_remove_and_whiteout()Maxim Patlasov1-30/+24
The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <> Signed-off-by: Miklos Szeredi <> Cc: <>
2016-07-22packet: propagate sock_cmsg_send() errorSoheil Hassas Yeganeh1-3/+1
sock_cmsg_send() can return different error codes and not only -EINVAL, and we should properly propagate them. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <> Cc: Willem de Bruijn <> Signed-off-by: David S. Miller <>
2016-07-21Documentation: dtb: xgene: Add hwmon dts binding documentationhotran1-0/+14
This patch adds the APM X-Gene hwmon device tree node documentation. Signed-off-by: Hoan Tran <> Acked-by: Rob Herring <> Signed-off-by: Guenter Roeck <>
2016-07-21GFS2: Fix gfs2_replay_incr_blk for multiple journal sizesBob Peterson3-11/+10
Before this patch, if you used gfs2_jadd to add new journals of a size smaller than the existing journals, replaying those new journals would withdraw. That's because function gfs2_replay_incr_blk was using the number of journal blocks (jd_block) from the superblock's journal pointer. In other words, "My journal's max size" rather than "the journal we're replaying's size." This patch changes the function to use the size of the pertinent journal rather than always using the journal we happen to be using. Signed-off-by: Bob Peterson <>
2016-07-21crypto: qat - make qat_asym_algs.o depend on asn1 headersJan Stancek1-0/+1
Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Cc: Signed-off-by: Jan Stancek <> Signed-off-by: Herbert Xu <>
2016-07-20Input: tsc200x - report proper input_dev nameMichael Welling4-6/+25
Passes input_id struct to the common probe function for the tsc200x drivers instead of just the bustype. This allows for the use of the product variable to set the input_dev->name variable according to the type of touchscreen used. Note that when we introduced support for TSC2004 we started calling everything TSC200X, so let's keep this quirk. Signed-off-by: Michael Welling <> Cc: Acked-by: Pavel Machek <> Acked-by: Pali Rohár <> Signed-off-by: Dmitry Torokhov <>
2016-07-20tty/vt/keyboard: fix OOB access in do_compute_shiftstate()Dmitry Torokhov1-21/+9
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS, which is currently 256, whereas number of keys/buttons in input device (and therefor in key_down) is much larger - KEY_CNT - 768, and that can cause out-of-bound access when we do sym = U(key_maps[0][k]); with large 'k'. To fix it we should not attempt iterating beyond smaller of NR_KEYS and KEY_CNT. Also while at it let's switch to for_each_set_bit() instead of open-coding it. Reported-by: Sasha Levin <> Reviewed-by: Guenter Roeck <> Cc: Signed-off-by: Dmitry Torokhov <>
2016-07-20net/mlx5e: Fix del vxlan port command buffer memsetSaeed Mahameed1-2/+2
memset the command buffers rather than the pointers to them. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Saeed Mahameed <> Signed-off-by: David S. Miller <>
2016-07-20hwmon: (ftsteutates) Remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <> Signed-off-by: Guenter Roeck <>
2016-07-20hwmon: (adt7411) set bit 3 in CFG1 registerMichael Walle1-1/+4
According to the datasheet you should only write 1 to this bit. If it is not set, at least AIN3 will return bad values on newer silicon revisions. Fixes: d84ca5b345c2 ("hwmon: Add driver for ADT7411 voltage and temperature sensor") Signed-off-by: Michael Walle <> Signed-off-by: Guenter Roeck <>
2016-07-20hwmon: Add driver for FTS BMC chip "Teutates"Thilo Cestonaro4-0/+856
This driver implements hardware monitoring and watchdog support for the FTS BMC Chip "Teutates". Signed-off-by: Thilo Cestonaro <> [groeck: Updated subject and description; fixed dependencies] Signed-off-by: Guenter Roeck <>